Technician – Process (Fixing Value Stream)

About this opportunity

Company Description

Bosch has been present in Malaysia since 1923, represented by Robert Bosch Sdn Bhd, with offices located in Selangor and Penang. In Malaysia, Bosch has diversified businesses in Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. The company has three manufacturing plants in Penang providing Car Multimedia, Power Tools and Automotive Steering systems. In 2017, Malaysia contributed sales of RM 615 million (127 million euro) and employed more than 2,800 associates.

Job Description

Job Summary
1.1 Responsible for 1 st level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by Failure Analyzer.
1.2 Support VSE in preparing and update In Process Checklist, Production Work Instruction (PWI), Production Quality Indication (PQI) and Quality Alert for daily production usage.
1.3 Assist VSE in preparation of workstations layout, set up workstation and line release documents before Pre-Pilot run, Pilot Run and mass production.
1.4 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production.
1.5 Support VSE in coordination of PDP project sample build (Pre-Pilot and Pilot run) on material availability and jig and fixtures readiness.
1.6 Update PT Packaging System for setting up part number for barcode scanning activities to avoid missing or wrong items been shipped to customer.
1.7 Responsible for monthly FOR (Fall Off Rate) data entry into FOR database for tracking of FOR and Internal Defect Cost (IDC).
1.8 Prepare rework flow for any non-conformities detected at production line for sorting or rework activities.
1.9 Responsible to follow up and track the status of rejected parts complained to supplier via Purchasing Quality engineer (PUQ).
1.10 Responsible to coordinate measurement support activities for verification of part dimension in order to determine root cause of rejection found in the line.
1.11 Support process improvement project in production through time study – VT improvement, direct productivity improvement, ergonomic, workstation, machine and technology.
1.12 Support production in achieving the effectiveness, output, FOR and quality target through continuous improvement activity.
1.13 Liaise with maintenance personnel for maintenance plan set up and spare parts replacement for existing machine used in production whenever necessary.

Job Scope
2.1 NEW PRODUCT INTRODUCTION
2.1.1 Prepare workstation layout, set up workstation and assist VSE/FPV in preparation of line release documents during pre-pilot run, pilot run and SOP.
2.1.2 Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and process meet the capability requirement during new product introduction.
2.1.3 Support VSE in coordination of PDP project sample build (Pre-Pilot and Pilot run) on material availability and jig and fixtures readiness.
2.1.4 Support VSE to prepare and register master samples, including the periodic renewal.

2.2 OPERATION SUPPORT:
2.2.1 Responsible for 1 st level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by Failure Analyzer.
2.2.2 Responsible to coordinate measurement support activities for verification of part dimension in order to determine root cause of rejection found in the line.
2.2.3 Responsible to follow up and track the status of rejected parts complained to supplier via Purchasing Quality engineer (PUQ).
2.2.4 Responsible for monthly FOR (Fall Off Rate) data entry into FOR database for tracking of FOR and Internal Defect Cost (IDC).
2.2.5 Support VSE in preparing and update In Process Checklist, Production Work Instruction (PWI), Production Quality Indication (PQI) and Quality Alert for daily production usage.
2.2.6 Prepare rework flow for any non-conformities detected at production line for sorting or rework activities.
2.2.7 Update PT Packaging System for setting up part number for barcode scanning activities to avoid missing or wrong items been shipped to customer.
2.2.8 Support production in achieving the effectiveness, output, FOR and quality target through continuous improvement activity.
2.2.9 Support process improvement project in production through time study – VT improvement, direct productivity improvement, ergonomic, workstation, machine and technology.
2.2.10 Liaise with maintenance personnel for maintenance plan set up and spare parts replacement for existing machine used in production whenever necessary.
2.2.11 Coordinate laser marking and EBL label drawing conversion activity into laser marking machine and EBL label printer machine and ISIR sample submission.
2.2.12 Any other tasks assigned by supervisor which is related to operations support.

Qualifications

• Diploma or equivalent in Mechanical/ Electrical & Electronics Engineering.
• Proficiency in spoken and written English and Bahasa Malaysia.
• Minimum of 3 years experience in a manufacturing environment.
• Literacy in Microsoft Office applications.
• Good in technical report writing and include complete data analysis and action recommendation.
• Experience in new product introduction (NPI), manufacturing activities and documentation (eg: Work Instruction, Control Plan, Process FMEA, Machine and Process Capability Studies, Statistical Process Control – SPC, Time Study (VT), Line Balancing, Setup Plan) is required.
• Able to understand and interpret technical drawing.
• Hand on experience on failure analysis and problem solving methodology.

Imported source listing. Details are supplied by the source and have not been independently verified by WorkerEra. Confirm the current vacancy on the employer’s page.

Source: Bosch Group — Malaysia careers